Monthly Archives: February 2016

The ingredients of a successful safety presentation

Everything that you need to do has a variety of requirements in order to be done properly. Safety presentations are not an exception to this basic rule. Therefore, it is important that you become aware of the things you need to bear in mind when you are making a speech that you will share to a lot of people. You must also remember that leaving a certain factor out when planning what you will include in your lecture is going to affect the persuasive power of your words.

Consider the following things as a guide in thinking about what your speech needs to have for it to work its magic in capturing the attention of listeners.

•  Know where your audience came from and what they expect to hear from you

MotivationAn important thing you need to realize before trying to speak in front of a lot of people is that they are expecting to know things that they don’t know yet, in a way that’s not difficult for them to understand. Therefore, you need to communicate with them in a way that’s similar to how they communicate among themselves. Carefully observe them as you talk, and if necessary, speak slower or faster for them to fully grasp what you are trying to say, and to avoid losing their focus on your lecture. Do not forget to tell them everything they expect to hear from your safety presentations.

•  Make sure you will start and finish your lecture on a high note

One way of keeping your audience interested is to deliver interesting and engaging opening words that will ignite their curiosity about your safety presentations. Consider raising questions that they must find an answer to throughout the course of your speech, or share a heartfelt message that they’ll appreciate further as they continue to listen. This way, you will force them to focus their attention on everything you will talk about.

Aside from providing an interesting introduction to your speech, it is also equally important that you send your discussion properly, highlighting the things that the participants need to remember as they go on with their daily lives. Using methods such as leaving them with a quote that they can relate to the things they’ve heard from you or just by stressing how they can use the things you’ve shared on their day to day activities is needed to properly end your lecture. It will enable the people who listened to your speech to remember everything they’ve learned from you.

•  Never try to give your audience too much information that they’d have to remember

As a speaker, you must know that your safety presentations are essentially geared towards informing people about the things they need to know to keep themselves out of harm’s way. But do not forget that they are also ordinary people that may not be able to digest all of the things that you will say to them, especially if you are too eager to share your knowledge during your lecture.

Talking endlessly about facts and figures on safety can lead to a serious information overload, which would surely be off-putting to many of your listeners. A good way of sharing a huge amount of info is by letting them do certain activities in which they’ll have to apply the knowledge they’ve just acquired before moving on with the discussion. That way they can retain any newly acquired info you’ve provided.

All in all, by keeping those things in mind as you conduct your speech, you’ll surely achieve your ultimate goal – to change people’s lives for the better.

Author Bio:
Safety presentations are not an exception to this basic rule. Therefore, it is important that you become aware of the things you need to bear in mind when you are making a speech that you will share to a lot of people. 

PCB Fabrication Overview and Methods

A PCB (printed circuit board) is the basis of almost all contemporary electronic circuits ever created. It revolutionized the way electronic parts and components are linked together. Prior to its introduction in the early 1900s, traditional designs are generally made of separate electronic pieces that are connected individually by several wires to one another. This technique was used for a while before the demand for smaller, more compact electronic circuits rose as the requirement for more portable devices have grown.

Pcb fabricationIt was in 1925 when the first patent of the PCB was submitted by Charles Ducats, which included a way of “printing” electrically conductive inks on a piece of insulated substrate to be used as an electrical medium. This started the name “printed circuits,” and PCB fabrication also began, which was considered as ground-breaking at that time as it made the creation of smaller electronic circuits possible.

Today, PCBs continue to satisfy the growing demand of the public when it comes to up to date technology. Modern PCB designs have no less than three specific functions which are: to give electronic parts a mechanical base, to electrically link the said parts together composing a whole circuit, and to supply connections for the input and output of a given circuit. There are many more but these three are the essentials.

There are also three main forms of PCBs based on structure and they are single-sided, double-sided, and multi-layered.

Their names refer to the way circuit designs are printed into the insulated surface during PCB fabrication. Single-sided PCBs have printed circuits on only one side of the board, while double-sided types have them on both sides. A double-sided PCB is able to carry more components, thus is appropriate for more complicated circuits. Multi-layered boards, meanwhile, are made up layers of printed circuits and insulations sandwiched on top of one another. It is able to accommodate even more components than a double-sided one and is the most commonly used type in modern devices today.

There are two methods of fixing electronic parts on a substrate and they are through-hole technology (THT) and surface-mount technology (SMT). THT was the original method used in attaching parts in PCB fabrication. Components such as resistors, capacitors, insulators, and diodes are made with legs that can be inserted in holes and then soldered to pads at the opposite side of the panel.

Since the 1980s the THT methods was replaced by a more cost-effective technique and that is the SMT. In the SMT method, electronic components are not inserted through holes but are directly soldered on the surface of the substrate. To hold the parts in place, a type of solder paste is applied to the points of contact on a circuit board and then passed through an oven for the paste to melt and establish fixed connection.

Even though the SMT method entails more precise attention in setting up the parts, it eliminates the lengthy process of drilling holes that is normal with the THT method. It also takes away the necessity of the pads on the other side of the substrate where the parts are soldered. These pads can actually take up so much space that could have been used for the design of much complex circuits.

There are no standard circuit boards when it comes to PBC fabrication. All designs come from individual designers and each circuit is usually unique from one another. PCB designers use computer-aided design software or CAD in creating the blueprint of a circuit. Once they finish the design in the computer, it can be printed out and then sent to the manufacturers to be mass produced. This makes the PCB fabrication process complex by nature.

Author Bio:
Pcb fabrication is all about the assembly of circuit boards used in electronics and computers. The layers of PCBs are assembled along with their specific surface patterns in order for them to be used in manufacturing electronics.

Various Styles of ID Lanyards

ID lanyardsWhether you are thinking of giving out ID lanyards as tokens for your event attendees or looking for a custom-designed lanyard for your employees, you can find what you are looking for in various online lanyard stores. There are different styles and types to consider.

The list is long, but below are a few of the options that you might want to consider:

Beaded Lanyard

These lanyards are the most economical id holder. They are made of metal or plastic beads that are strung together. These are often used as functional ornaments.

Budget Lanyard

These are the most affordable ID lanyards in town.Though they are cheap, it does not mean that they are not good in quality and design. They are usually made of polyester twill. The simplicity of the diagonal lines make them attractive.

Breakaway Lanyard

This is a good option for employees who work on construction sites and other dangerous buildings. These are also called “safety” lanyards.

Cell Phone Lanyard

You never have to lose your cell phone with this lanyard. As phones evolve to lighter and smaller ones, these lanyards are in demand today. You can choose between the neck or wrist lanyard.

Cord Lanyard

These are usually made from nylon, cotton, or polyester. If you have a tight budget, these lanyards are great for name badges.

Dog Tag Lanyard

These lanyards are made from stainless steel which are laser engraved or from a full color plastic. Each lanyard is packaged with a 30 inches neck chain.

Flat Material Lanyard

Have a design in mind? Choose flat material since they are wider compared to others. These ID lanyards are manufactured from flat cotton, polyester, or nylon.

Lip Balm Lanyard

Get a lip balm lanyard with a 30-inch neck chain and you never have to worry about chapped lips while biking, hiking, swimming, and doing other outdoor trips and activities.

Name Badge Lanyard

These are cheap and non-imprinted lanyards made from cotton or nylon. Since you will not have to spend money on printing, these lanyards are available in different colors. You can also choose what kind of attachment is suitable for your needs.

Pen Lanyard

Tired of buying high-quality pens because you always misplace it? Save your money on other things once you order a pen lanyard. This has a special hardware that connects to the pen cap and keeps your pen secured.

Quick Release Lanyard

This lanyard has a side-squeeze buckle at the bottom which lets you detach a name badge without taking off the lanyard around your neck.

Retractable Lanyard

Getting a valid ID, then putting it back in place – annoyed with this situation? Then, retractable lanyards are for you. This is excellent for keyless entry systems, ID card tapping, and card swiping because it is retractable for about 30 inches away from you.

Shoelace Lanyard

From the word itself, these lanyards are narrower than others. Customized printing is allowable, but limited to letters only.

Water Bottle Lanyard

Heading out for a jog? Working out in a gym? This lanyard is definitely for you. It has a special rubber ring which ideally fits around necks of plastic water bottles. There is no need for you to bring a large bag to put in your water bottle.

Whistle Lanyard

This can be a good safety tool. You can use a lanyard to hold your emergency whistle. Those who are serving as guards, police, or organizers can also use these lanyards for easy access to their whistle when needed.

Wrist Lanyard

These are also known as “coil” lanyards which flexes out about 12 inches that fit any wrist size. If you are a multi-tasker, this is ideal for you since your hands can do other things while securing your IDs and keys within your wrist.

Why Silicone wristbands are a Great Promotional Tool

In a world that is fast-changing, businesses and organizations constantly have to come up with fresh ways to endorse their products and ideas. When it comes to promotional tools, one of the greatest trends to hit the market are Silicone wristbands. These bracelets are an effective way to get a message across because of its broad appeal. People from all walks of life can be found wearing these bands and for good reasons. In addition to being a fun fashion accessory, these bracelets are worn to make a statement; to support a cause and to express team solidarity.

For businesses, these bands are the perfect promotional giveaways. These rubber bracelets come in eye-catching colors and are very sturdy. Most importantly, they are highly customizable. Companies who are interested in ordering custom bracelets can design their own bands and even have their company logo printed on the surface of the bracelet.

Silk Screen bracelets:

Now, these bracelets come in different styles and sizes. One of the most popular styles is the Silk Screen bracelets. For this type of bracelet, the design is printed directly on the surface of the band. This style is perfect for businesses who want their custom logos and lettering replicated on the bracelets. Another advantage of silkscreen printing is that the design can be placed all around the bracelet. What makes this type of wristband a crowd-pleaser is that it’s very affordable, however the print is not as long-lasting compared to the Color Filled bracelets.

Color Filled bracelets:

For those who wish to order a more head-turning bracelet, they can opt for the Color Filled bracelet. The process of making this wristband begins by debossing the surface of the rubber with the desired text or artwork. The indented parts of the bracelet are then filled with paint which makes the design pop up. This type of wristband is perfect for those who want their message to be visible even from a short distance. For this type of band, manufacturers offer a variety of paint and bracelet colors so customers can mix and match until they’ve come up with the ideal design that best represent their brand or cause.

Silicon wristbandsAnother smash hit in the world of Silicone wristbands is the Segmented bracelet. What makes this style special is that it allows up to three colors in a single bracelet. This feature is valuable to individuals who want to express their support to their favorite sports team. This style allows them to incorporate their team colors into one band. Wearing apparel and accessories that bear one’s team colors when attending sports events is not only fun, it also boosts morale and promotes team solidarity among fans. Individuals who wish to customize their own Segmented wristband have plenty of options when it comes to placing their designs on the band. Texts and logos can be silk screened, debossed, color filled or embossed on the surface. In addition to having their team logo replicated on the band, sports fans can also add a slogan or a few words of inspiration on their team bracelets.

Silicone wristbands are not only useful to businesses and sports fans. Fundraisers can get into the act by designing awareness bracelets that promote their various causes and charities. These bracelets are ideal fundraising items. Individuals don’t only get to donate to a particular cause by purchasing these bracelets, they also get to go home with a memento from their favorite charitable organization.

Silicone wristbands are popular promotional items. For wearers, they are fun and eye-catching. Not to mention, these bracelets are made from sturdy, waterproof material that will last for a long time. For businesses, distributing these bracelets is a subtle yet effective way to get exposure for their brand. For charitable institutions, it’s a proven way to reach many awareness to important causes.